behind the clean: exterior package

Exterior body wash

  • Pressure wash spray

    We begin with a light pressure wash of the exterior of the car with water to break up tough debris and create a layer for the soap to stay on.

  • Snow foam soap spray

    Using a spray foam nozzle, we coat the outside of the car in a snow soap foam cover. Once applied, the foam penetrates dirt that sits on the paintwork and gently lifts it from the surface. Once rinsed off, the result is a surface that's ready for a deeper and safe contact wash.

  • Hand contact wash

    Using a scratch-free microfiber hand scrub, we hand wash over the soap on the car, removing all remaining debris and dirt.

  • Rinse and dry

    After the hand scrub, we remove excess soap and any leftover debris on the car with one last pressure wash, creating a clean and shiny finish. Next, we use a water-absorbing microfiber towel to completely dry your vehicle, avoiding air drying to stop water stains and streaks. Finally, we use a beadmaker water protectant spray to give your paint protection and a shiny finish.

Glass and wheels

  • Window wash

    After the body has been cleaned, we apply Sprayway® glass cleaner to both the inside and outside of all windows, wiping each window with a microfiber towel three times.

  • window dry

    The key to a perfect window dry is to avoid direct sunlight. Immediately after the glass cleaner is washed, we use a microfiber towel in vertical motion to remove streaks and sun water stains.

  • rim and wheel wash

    First, we rinse each tire with a pressure washer. Next, we spray all tires with a 4:1 ratio all-purpose cleaner and scrub with a tire scrubber. We repeat this process for all of the rims as well.

  • rim and wheel dry

    To finish off the tires, we wash off all excess cleaner with a pressure washer. If wet spots are visible, a microfiber towel is used to dry off the rims. Then we apply a hyper dressing tire shine.

Back